Voice Processor 2x

List: $1,910.00

Quantity:

Brand:

Description

Voice Processor 2x

 

A Crucial LInk.
The microphone is a crucial link to the audience. Proper management of that link is essential. Voice Processor 2x is an outstanding programmable microphone processor that’s flexible, powerful, and easy to use.

Two Independent Voice Processors.
Two independently programmable channels of ultra-low latency digital mic processing in one rack space. 2 mic/line inputs, word clock input, 2 mic/line outputs, 2 AES-3 outputs.

DSP Specifically Tailored for Voice Processing.
Compression, EQ, de-essing, downward expansion, high and low pass filters, waveform symmetry. All there. All at once.

Turn-Key Means Symetrix Did the Hard Work.
Voice Processor 2x’ Windows® application presents an intuitive GUI which mimics the hardware signal flow to enable a short programming timeline and rapid hardware deployment.

When It’s Time to Go On-Air.
Voice Processor 2x stores up to 50 presets for on-air personalities. Presets may be recalled from the front panel or remotely.

 

FEATURES

 

  • A DSP Designed Specifically for Voice Processing 
  • 2 Independent Channels
  • Supports up to 50 Unique Presets
  • Turn-key Programming for Rapid Deployment

SPECIFICATIONS

 

Inputs
Nominal Input Level+4 dBu or -10 dBV line level, to -50 dBu mic level (software selectable) with 20 dB of headroom.
Maximum Input Level+23 dBu.
Input Impedance6.67 kΩ balanced, > 3.3 kΩ unbalanced
CMRR> 75 dB @ 1 kHz, unity gain.
Mic Pre-amp EIN> -127 dB, 22 Hz - 22 kHz, 100 Ω source impedance.
Phantom Power+48 VDC.
A/D Conversion24-bit delta/sigma.
A/D Dynamic Range116 dB (A-Weighted).
A/D THD+Noise-102 dB (un-weighted); 1 kHz @ -2 dBFS with 0 dB gain.
A/D Latency0.25 mS.
System
Nominal Sampling Rate48 kHz.
Word Clock Input Range22 - 192 KHz
A/D/A Frequency Response20 Hz - 20 kHz, +/- 0.25 dB.
A/D/A Dynamic Range113 dB (A-Weighted).
A/D/A Latency< 0.7 mS; with all DSP active.
Interchannel Crosstalk-90 dB @ 1 kHz, typical.
Outputs
Nominal Output Level Analog+4 dBu line level with 20 dB of headroom.
Nominal Output Level Digital-20 dBFS. For unbalanced analog output, float (do not connect) the minus output terminal. Unbalanced usage results in 6 dB lower output level.
Maximum Output Level Analog+24 dBu. Digital: 0 dBFS.
Output Impedance Analog200 Ω balanced, 100 Ω unbalanced. Digital: 110 Ω.
D/A Conversion24-bit delta/sigma.
D/A Dynamic Range114 dB (A-Weighted).
D/A THD+N-98 dB (un-weighted); 1 kHz @ -2 dBFS.
D/A Latency0.2 mS.
Mic Level Output Pad (Internal)-42 dB.
Mechanical Data
Space Required1U (WDH: 48.02 cm x 23.11 cm x 4.37 cm / 18.91 in x 9.1 in x 1.72 in), depth is specified from front panel to back of connectors. Allow at least 3 inches additional clearance for rear panel connections. Additional depth may be required depending upon your specific wiring and connections.
Electrical100-240 VAC, 50/60 Hz, 25 Watts maximum. No line voltage switching required.
VentilationMaximum recommended ambient operating temperature is 30 C / 86 F. Ensure that the left and right equipment sides are unobstructed (5.08 cm, 2 in minimum clearance). The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc.
CertificationsUL 60065, cUL 60065, IEC 60065, EN 55103-1, EN 55103-2, FCC Part 15, RoHS.
Weight8 lbs. (3.60 kg).