MVQUICK Battery Hot Swap system

Request Pricing




MVQUICK Battery Hot Swap system


MVQUICK is a hot swapping system for installation as an interface between the camera (or any other V-lock compatible device) and the battery pack. The main purpose is to allow camera battery replacement without any power interruption through an automatic detection of the battery removal. Additionally, MVQUICK provides an alternative power source of about 21Wh to be used as a UPS in case of a sudden power failure or extended power requirements. High-load cell technology permits discharging of up to 10A when used as a standalone power source. It automatically recovers a part of the energy spent during the hot swap period upon reinstatement of a fresh battery. It can be charged normally on standard V-lock chargers. MVQUICK is designed to work perfectly even with RED® ONE cameras. Now available MVQUICK-AB for installation on 3-stud gold mount enabled systems.


Blueshape has adopted high quality individual packaging for every individual battery.

A recent addition is the CONTACT COVER (shown here) included on every V-mount battery that comes out of our production as the ultimate protection against short circuit of the contacts. This cover does exactly what it says and makes it virtually impossible for a short between the terminals to occur during transport. This is the latest enhancement in a list of safety features that give maximum protection, especially important during air transport. They request clients to store the original boxes and also the CONTACT COVERS so as to reuse them if the batteries need to be transported in any aircraft.





LED indicators showing state of charge of internal battery
Push button for capacity check
Installation interface for external V-Lock battery
Output connector (power outlet, to camera)
Data communication selector to enable or disable battery communication to camera
D-Tap auxiliary connector
V-Lock interface for MVQUICK installation




  • Nominal Voltage: 14.8V
  • Voltage range: 10.8V ~ 16.8V
  • Nominal Capacity: 1.5Ah, 21Wh
  • Max. discharge current: 10A
  • About up to 10~15 minutes runtime when used standalone as an UPS backup battery
  • Installable on any V-Lock enabled device
  • Self charging through the installed battery, can be charged also on any V-Lock chargers
  • Allow data communication from battery to camera
  • Size: 142 x 83 x 50mm (5.59" x 3.27" x 1.97")
  • Weight: 0.49Kg (1.08lbs)
  • NEW: enhanced contact protection for safer air transport