ES-993U 2.3″ Time Code Remote Display

Request Pricing

Quantity:

SKU: ESE-ES993U Category:
Brand:

Description

ES-993U 2.3″ Time Code Remote Display

 

The ES-993U is a Time Code display featuring 2.3″ high (Hours & Minutes) and 1″ high (Seconds) amber LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure(5″ H x 12″ W x 3.5″ D). The unit accepts, via the rear-mounted terminal block, either ESE Time Code™ (TC76™, TC89™, or TC90™) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code (format “0”, “1” or “A” at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-993U will automatically determine which code is being received. A rear-mounted DIP switch is used to configure the display for 12 or 24 Hour format, or to display the Date instead of time-of-day (if incoming time code contains Date information, such as ESE TC90, date-encoded SMPTE/EBU or ASCII formats “1” or “A”). If the Time Zone option is ordered, a rear-accessible DIP switch is installed for this function. If receiving ESE Time Code™ from a timer, the unit will display Minutes, Seconds and Tenths of Seconds (if the timer has the Tenths option).

 

FEATURES

 

  • Wall Mount Display
  • Reads SMPTE/EBU, ASCII & ESE Time Code™
  • Automatic Code Detection
  • Six Amber LED Displays (2.3" high Hours & Minutes, 1" high Seconds)
  • Viewing Distance 70'
  • Switchable Between 12 & 24 Hour Format Display
  • Switchable to Date display
  • Optional Time Zone Offset
  • NTP Option Available
  • UL & 220-240 VAC options available (110-120 VAC is standard)

PRODUCT OPTIONS

 

BlackBlack Anodized Front Panel. Option 'P' is required.
BlueBlue LED Displays
GreenGreen LED Displays
J220 VAC/50 Hz Operation: The unit is configured to operate from 220 VAC line voltage. 117 VAC 50/60 Hz is standard.
NTP-CNTP Client: NTP Client Displays synchronize exclusively with an NTP server (replaces all standard inputs).
P19" Front Panel (Rack Mount): Designed for mounting into a standard equipment rack. Panel is 1/8" black anodized Aluminum and chassis is 5" - 10" deep.
PoEReceives 48V operating power via Ethernet cable.
RedRed LED Displays
TZTime Zone Offset: Internal DIP switch allows the hours (and half-hour) to be independently offset to any time zone.
UL"UL" Approved Power Supply: The unit is supplied with a UL/CSA approved wall mount power supply.
W3-Wire Power Cord: Recommended where static charges can occur. Standard on many units, otherwise a 2-wire cord is supplied.