PS-702 2 CH Rack Mount Power Supply

Request Pricing

Quantity:

Brand:

Description

PS-702 2 CH Rack Mount Power Supply

 

2-Channel 1-Amp (2-Amp Peak) Rack Mount (1RU) Universal Power Supply. 2-channel x 3 intercom jacks, 1 A/B selectable headset jack and 1 program input.

The PS-702 can deliver 1.2 amps at 30 volts DC to two channels. This is sufficient to power up to 40 beltpacks, 10 speaker stations, or 12 headset stations even under the most demanding conditions. Either channel is capable of supplying up to 1.2 amps. The full current capacity may be divided between the two channels.

Use our Encore Power Supply Calculator to calculate the amp budgets allowed based on the number of Encore devices and power supplies are in your system.

 

SPECIFICATIONS

 

Program Line Input

  • Maximum Level before Clipping: >= 20dBu
  • Input Impedance: >= 5KΩ

Frequency Response

  • Program Input - Partyline: 200 - 20KHz ± 3dB

Max Distortion

  • Program Input - Partyline: <= 0.2%

Noise

  • Program Mic Input - Partyline:< -70dBu

Max Gain

  • Program Input - Partyline: >= -16dB

Min Gain

  • Program Input - Partyline: <= -20dB

Mains Power

  • Input Voltage Range: 100 - 240 VAC
  • Input Frequency Range: 50 - 60 Hz
  • Input Power: <= 60 VAC
  • Output Voltage: 30 VDC ± 0.5V
  • Output Current per Channel (Continuous): 1.2 A
  • Output Current per Channel (Peak): 2 A (Do not exceed the 1.2A rating for more than 2 seconds per 1 minute period)
  • Short Circuit Recovery Time (1st short): <= 0.5 sec
  • Short Circuit Recovery Time: >= 20 shorts in 20sec <= 20 sec

Station Capacity

  • Up to 40 RS-601 beltpacks or 10 speaker stations or 12 headset stations distributed over both channels

Rear Panel Connectors

  • Intercom: (6) XLR-3M (3 per channel)
  • Program: (1) XLR-3F
  • AC Power: IEC 320 connector

Rear Panel Controls

  • (2) Termination On-Off switches
  • (1) Volume control

Front Panel Connectors

  • Intercom (1) XLR-3M

Front Panel Controls & Indicators

  • (1) Intercom channel switch
  • (1) A+B link switch
  • (2) Program switch
  • (2) Send level controls
  • (1) Test tone switch
  • (2) Overload LEDs
  • (1) Link indicator LED
  • (1) Power indicator LED
  • (1) Power switch

Environmental

  • 32˚ - 122˚F (0˚ - 50˚C)

Dimensions

  • 19 in. W x 1.75 in. H x 7.5 in. D
  • (483 mm x 44 mm x 190 mm)

Weight

  • 6.16 lbs. (2.80 kg)

 

Product Spares List

Product Spare PartSpare Part Description
810493ZPS-702 MANUAL