AND-MT500D DryLine® Dehydrator, Low-pressure membrane, Cut-in at 2.0 psi, Cut-out at 5.0 psi

Description

MT500D

DryLine® Dehydrator, Low-pressure membrane, 19 in rack mountable, Wall mountable, Cut-in at 2.0 psi, Cut-out at 5.0 psi, with discrete and summary alarms, 115/230 Vac, 50/60 Hz

Product Classification
Brand	DryLine®
Product Type	Dehydrator
Outline Drawing
Alarm
Alarm Type	Discrete   |   Summary
Excess-Run Alarm	10 minutes, factory set
High-Humidity Alarm	7.5% RH, factory set
High-Pressure Alarm	Factory set (only on summary contacts)
Low-Pressure Alarm	68 mbar | 7 kPa | 1 psig
Power-Fail Alarm	Loss of input power
Dimensions
Net Weight	16.0 kg   |   35.3 lb
Product Depth	419.1 mm   |   16.5 in
Product Height	172.7 mm   |   6.8 in
Product Width	439.4 mm   |   17.3 in
Gross Weight, Packed	19.0 kg   |   41.9 lb
Product Depth, Packed	541.0 mm   |   21.3 in
Product Height, Packed	312.4 mm   |   12.3 in
Product Width, Packed	502.9 mm   |   19.8 in
Electrical Specifications
Voltage	115/230 Vac ±10%, selectable
Alarm Contact Rating	Form C dry contacts, 2 amps at 30 Vdc
Operating Temperature	-10 °C to +50 °C (+14 °F to +122 °F)
Power Consumption, at runtime	275.0 W
Power Consumption, average	8.3 W
Power Consumption, maximum	275.0 W
Power Consumption, minimum	0.2 W
Power Cord	Europe power cord with stripped leads   |   USA power cord
Power Frequency	60/50 Hz
Power Phase	Single
Suggested Circuit Breaker Size	20 A
Circuit Breaker Requirement	Electrical connections require separate circuits for dehydrator installation
General Specifications
Volume Capacity, minimum	283.2 L   |   10.0 ft³
Volume Capacity, maximum	3398.0 L   |   120.0 ft³
Brand	DryLine®
Cut In/Out Pressure Type	Factory set
Cut In Pressure	14.0 kPa   |   2.0 psig
Cut In Pressure Default	14.0 kPa   |   2.0 psig
Cut Out Pressure	34.5 kPa   |   5.0 psig
Cut Out Pressure Default	34.5 kPa   |   5.0 psig
Dehydrator Type	Automatic Membrane
Dew Point	Better than -45 °C (-50 °F) at 95% RH at +40 °C (+104 °F)
Flow Rate, nominal	14.20 SLPM   |   0.50 SCFM
Includes	3/8 in polyethylene tubing   |   90º elbow fitting   |   Instruction sheet   |   Male connector fitting   |   Needle valve   |   Power cord   |   PTFE tape
Mount Type	Bench   |   Floor   |   Rack   |   Wall
Port Count	4
Port Type	3/8 in PE tube
Rack Type	EIA 19 in   |   ETSI N3 (optional)
Rack Units	4
Voltage Type	ac