MT050C DryLine® Dehydrator, Low-pressure membrane, psig (2-6 adjustable)

Request Pricing

Quantity:

SKU: AND-MT050C Category:
Brand:

Description

MT050C

 

DryLine® Dehydrator, Low-pressure membrane, 19 in rack mountable, Wall mountable, 3.0 psig (2-6 adjustable), with summary and discrete alarms, 115/230 Vac, 50/60 Hz

 

Product Classification  
Brand  DryLine®
Product Type  Dehydrator
Outline Drawing
   


Alarm  
Alarm Type  Discrete   |   Summary
Excess-Run Alarm  10 minutes, factory set
High-Humidity Alarm  7.5% RH, factory set
Low-Pressure Alarm  68 mbar | 7 kPa | 1 psig
Power-Fail Alarm  Loss of input power
   


Dimensions  
Net Weight  20.0 kg   |   44.1 lb
Product Depth  419.1 mm   |   16.5 in
Product Height  172.7 mm   |   6.8 in
Product Width  439.4 mm   |   17.3 in
Gross Weight, Packed  23.0 kg   |   50.7 lb
Product Depth, Packed  541.0 mm   |   21.3 in
Product Height, Packed  312.4 mm   |   12.3 in
Product Width, Packed  502.9 mm   |   19.8 in
   


Electrical Specifications  
Voltage  115/230 Vac ±10%, selectable
Alarm Contact Rating  Form C dry contacts, 2 amps at 30 Vdc
Operating Temperature  -10 °C to +50 °C (+14 °F to +122 °F)
Power Consumption, at runtime  220.0 W
Power Consumption, average  6.6 W
Power Consumption, maximum  220.0 W
Power Consumption, minimum  0.2 W
Power Cord  Europe power cord with stripped leads   |   USA power cord
Power Frequency  60/50 Hz
Power Phase  Single
Suggested Circuit Breaker Size  20 A
Circuit Breaker Requirement  Electrical connections require separate circuits for dehydrator installation
   


General Specifications  
Volume Capacity, minimum  0.0 L   |   0.0 ft³
Volume Capacity, maximum  1699.0 L   |   60.0 ft³
Brand  DryLine®
Dehydrator Type  Automatic Membrane
Dew Point  Better than -45 °C (-50 °F) at 95% RH at +40 °C (+104 °F)
Flow Rate, nominal  3.40 SLPM   |   0.12 SCFM
Includes  3/8 in polyethylene tubing   |   90º elbow fitting   |   Instruction sheet   |   Male connector fitting   |   Needle valve   |   Power cord   |   PTFE tape
Mount Type  Bench   |   Floor   |   Rack   |   Wall
Port Count  4
Port Type  3/8 in PE tube
Rack Type  EIA 19 in   |   ETSI N3 (optional)
Rack Units  4
Regulated Output Pressure Type  factory set
Regulated Output Pressure, maximum  42.0 kPa   |   6.0 psi
Regulated Output Pressure, minimum  14.0 kPa   |   2.0 psi
Voltage Type  ac

Regulatory Compliance/Certifications

AgencyClassification
RoHS 2011/65/EUCompliant
China RoHS SJ/T 11364-2006Below Maximum Concentration Value (MCV)
ISO 9001:2008Designed, manufactured and/or distributed under this quality management system