Starlink Transfer Panel TP-128

List: $2,150.00

Quantity:

SKU: MOS-TP128 Category:
Brand:

Description

Starlink Transfer Panel TP-128

 

For DTV Link-A / NX GEN / Starlink Products

FEATURES

 

  • Redundant standby system accessory
  • Manual and automatic transfer with priority selection of primary or secondary radios.
  • Tri-color LED indicators display status of transmitter and receiver for both primary and secondary radios.
  • RF transfer relay provides high isolation, low insertion loss and wide bandwidth, while maintaining RF termination of the standby radio transmitter (for those models with built-in relays).
  • Hot or cold standby switching supported.
  • Ethernet port for configuration and monitoring using a web browser.
  • SNMP monitoring and notification of radio failures or TP-128 changes.
  • Compact 1 RU rack-mountable unit.

SPECIFICATIONS

 

SYSTEM
TYPELatching Transfer Switch
(standby TX switched into 50-ohm power termination)
FREQUENCY RANGE0-18 GHz (with internal relay)
LOAD POWER10 Watts (< 3 GHz); 5 Watts (> 3 GHz)
INTERNAL RF RELAY
TYPEMake before Break Transfer Switch
SWITCHING TIME15 ms, max.
LIFE1 x 106 cycles
EXTERNAL RF RELAY
SUPPLY VOLTAGE12V or 24/28V (model dependent)
CURRENT CAPABILITY1.0A, max.
DRY RELAY CONTACTS5.0A, 50V, max.
STATUS INPUTS2 TTL or contact closure
RADIO INTERFACES
RF2 Radio, 1 Antenna, 1 Load SMA Female
CONTROLDB-9M and RJ-45
CONTROL
NETWORK MANAGEMENTSNMP, Proprietary Web GUI, CLI
LAN/NMS CONNECTOR10/100Base-T RJ-45 Female
SERIAL115,200 b/s DB-9M
MIMIC PORT4 TTL Output 2 TTL or contact closure Input 2.5mm Terminal Block
Over Heat Sinks
POWER / ENVIRONMENT
DC POWER-48 Vdc ±10%, <12.5 W
AC POWER(EXTERNAL PS) 100-240 Vac, 47-63 Hz, <0.2 A
OPERATIONAL TEMPERATURE-30 to 60 ºC
HUMIDITY95%, non-condensing
ALTITUDE15,000 feet / 4572 meters, maximum
PHYSICAL
SIZE (WITHOUT RACK EARS) 17.5w x 1.75h x 11.5d inches
(44.5 x 4.45 x 29.2 cm)
WEIGHT10 lbs (4.5 Kg)
EIA RACK MOUNT19 inch/48.3 cm, 1 rack unit