FS155-30T Tower Beacon Flasher 115v

Request Pricing

Quantity:

SKU: SSA-FS15530T Category:
Brand:

Description

FS155-30T Tower Beacon Flasher 115v

 

The FA and FS Series Flashers have proven their reliability through years of use on communication towers, smoke stacks, cooling towers, tall buildings, bridges and utility towers. The highest quality components are encapsulated in a rugged plastic housing with a molded-in heat transfer plate. The flash rate, ratio, and failsafe design meet FAA regulations. Zero voltage switching can increase lamp life up to ten times. The FS155-30RF & FS165-30RF include superior RF filtering circuitry for use in high RF installations, including AM hot towers.

Operation

FS Series – Flasher (OFF First)
FA Series – Flashers & Aux. Modules
Upon application of input voltage, the T2 OFF time begins. At the end of the OFF time, the T1 ON time begins and the load energizes. At the end of T1, T2 begins and the load de-energizes. This cycle repeats until voltage is removed.
Reset: Removing input voltage resets the output and the sequence to T2.

SPECIFICATIONS

 

Input Voltage (V)120VAC
Input Tolerance (%)±20%
Input AC Line Frequency (Hz)50/60Hz
Humidity95% relative non-condensing
Output Load Rating (VA)2500W
Flash Rate (fpm)30FPM ±10%
On/Off Ratio (%)50-67% ON time; 33-50% OFF time
CircuitryEncapsulated
Inush200A peak for 1 cycle of AC line
Operating Temperature-55° to 65° C (-67° F to 149° F)
Storage Temperature (F/C)-55° to 85°C (-67°F to 185°F)
Mounting MethodSurface mount with one #10 (M5 x 0.8) screw
Termination Type0.25 in. (6.35mm) male quick connect terminals
Dimensions2.00 x 2.00 x 1.21 in. (50.8 x 50.8 x 30.7mm)
Weight (lbs/g)≌3.9oz (111g)
Sample capableNo