K10 2-way 10″ Active Loudspeaker (Discontinued)

List: $909.99

Discontinued

SKU: QSC-K10 Category:
Brand:

Description

 K10 Active Loudspeaker

 

  • 10” Woofer; 1.75” diaphragm compression driver
  • 90° conical DMT coverage
  • Maximum SPL 129 dB peak
  • Attractive and professional appearance
  • Rugged ABS enclosures
  • 16-gauge powder coated steel grille
  • 1000-watt continuous Class D power modules in all models
  • Functions as a monitor wedge
  • Comfortable ergonomic handles
  • 35 mm pole sockets with Tilt-Direct™
  • M10 rigging points
  • Eyebolt and yoke mount accessories available

 

  • Onboard mixer with two combo XLR and ¼” inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced output
  • Extensive DSP enhances system performance:
    • DMT™ (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural “dead” or “hot” frequency zones.
    • Intrinsic Correction™, first featured in our high-end line-array products maps 65–75 spatially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat band pass target. The result is a speaker that behaves equally well across the entire sound field.
    • DEEP™ and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
    • GuardRail™ protection protects both the amplifier module and your performance from unnatural and destructive clipping.

SPECIFICATIONS

 

ConfigurationMultipurpose 2-way
Transducers
Low-frequency
High-frequency
10" cone transducer
1.75" diaphragm compression driver
Frequency Response (-6 dB)60 Hz - 18 kHz
Frequency Range (-10 dB)56 Hz - 20 kHz
Nominal Coverage (-6 dB)90° conical DMT
Maximum SPL1129 dB peak
 
Amplifiers
Power Output21000 W continuous Class D
(500 W LF, 500 W HF)
2000 W peak
Input ImpedanceXLR / ¼": 40 kΩ balanced / 20 kΩ unbalanced
XLR / ¼" MIC mode: 2260Ω balanced
RCA: 10 kΩ
ControlsPower, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
IndicatorsPower, Signal A, Signal B, Standby, Limit, Mic
ConnectorsBalanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector
CoolingOn demand, 50 mm variable speed fan
Amplifier ProtectionThermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer ProtectionThermal limiting, excursion limiting
AC Power InputUniversal power supply 100–240 VAC, 50 to 60 Hz
AC Power Consumption
(1/8 of full power)
100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A
 
Enclosure
MaterialImpact resistant ABS
FinishBlack paint
GrilleRugged powder-coated steel
Dimensions (HWD) inches20.4 × 12.6 × 11.8
Dimensions (HWD) mm519 x 320 x 300
Weight (Net)32 lb / 14.5 kg
Available AccessoriesK10 Tote, K10 Yoke, M10 Kit-C

Alternative Products