Daptor Two Wireless Phone Audio Interface

Request Pricing


SKU: JKA-DAP2 Category:


Daptor Two Wireless Phone Audio Interface


Simply plug Daptor Two into the headset jack of any wireless phone or notebook computer that accepts a third party headset or earpiece. Send and receive voice band audio during regular calls, or full bandwidth audio using third party codec applications. Your device will recognize Daptor Two as a headset which will disable the internal mic and speaker.

Audio Connections

You may use either the XLR input or 1/4″ input, not both. The XLR input jack is disconnected when a cable is plugged into the 1/4″ input jack. The same is true for the XLR and 1/4″output jacks.





ComparisonCellTap 4CDaptor TwoDaptor Three
HD Voice Compatible (7 kHz Wide-Band Speech)
Bluetooth Wireless Technology - -
4-conductor 3.5 mm Headset Interface -
Switch Selects Between Popular TRRS Configurations - -
3.5 mm Stereo Input - -
3.5 mm Stereo Output -
3-pin XLR Input/Output -
1/4" Input/Output - -
3.5 mm TRRS Headset Jack - -
Screwdriver Caller Level adjustment - -
Passive Design No Battery or AC Required -
> 18 Hours on one 9-volt Alkaline Battery - -
Made in America
Approved for Sale in Europe and Australia



InputBalanced Female XLR /
Unbalanced 1/4" Mono
Impedance600 ohms
Level250 mV RMS (-10 dBu nom, 0 dBu max)
OutputBalanced Male XLR /
Unbalanced 1/4" Mono
Impedance600 ohms
Level45 mV RMS (-25 dBu nom)
Size4.4" x 2.7" x 1.2" (11.2 x 6.9 x 3.5 cm)
Weight9 oz. (250 g)